Monthly Archives: December 2012

Table Restore 5: The finished product

With the final coat of oil applied this morning just about dry, it’s time to construct the table ready for Christmas lunch tomorrow.


Oddly I have not really documented putting the table together.  There was not too much to it anyway – 2 nuts and bolts and a couple of washers on each leg.  I’ll upload some nice pics afterwards but here is the obligatory before & after pictures: 

Oak table before refinishing

Table as I bought it

 

Table after refinishing

Finished Table

 It certainly looks much much better and it was all pretty straight forward.

I would say a bloody successful first project.  Once Christmas is done and dusted I’ll think about what the next project will be.  Chin chin.  Merry Christmas …..

 

Table Restore 4: Oiling

I spent ages trying to work out the best thing to treat the table with so that it is waterproof etc.  I wanted a natural looking finish and so although varnish is hard-wearing even a clear varnish would be just too shiny. In the end I decided to go for Danish furniture oil.

Danish Oil

Danish furniture oil is a penetrating and durable synthetic oil.  It provides a water and alcohol resistant finish and although makes the wood a little darker and brings out the grain, it provides a natural finish.  It is really easy to apply and dries fairly quickly too.  It stinks though so if you can apply outside that would be better.  I went for a small can of Ruskins Danish Oil which was enough for 3 coats.

The other things you will need are:

  • A hoover (to hoover the dust)
  • Tack cloths (to remove the fine dust)
  • A brush or soft cloth (to apply the oil)
  • Wire wool (to apply the last coat of oil)

The video below shows oiling the table:

YouTube Preview Image
Video of oiling the table

I need to do 3 coats and need to leave 6-8 hours between coats.  It’s going to be tight but should just about make it in time for Christmas. The final step is to put it all together.

Table Restore 3: Sanding the table top

Before sanding the table top I researched electric sanders and found the Black & Decker Mouse Sander on offer for £20 at Homebase.  I also bought some extra sand paper for it. 

Black & Decker Mouse SanderBlack & Decker Mouse Sander

On a cold December day I put a trestle table in my drive and started sanding the main part of the table.  You need to sand with the grain as if you go across the grain then it leaves scratches which you then need to sand out:

YouTube Preview Image

Video of sanding the table top

The Mouse Sander worked really well.  I went through about 8 papers so one definitely needs to buy some extra paper.  Within a day I managed to sand it all with the table with firstly a course grain, then a medium and finally a fine grade of sandpaper.  No big problems really.  This is how it ended up: 

Table top after sanding

Table top after sanding

The next step is to treat the table with Danish furniture oil.  16 days to finish before 12 people arrive to eat off it on Christmas Day!